"The Regulator 2.0" for Cornhole Board Measurement (Free Shipping)
"The Regulator 2.0" for Cornhole Board Measurement (Free Shipping)
NEW VERSION 2.0 with an improved knob using a more dense material and added metal string connector to prevent breaks when accidently let go.
The Regulator is a simple device that allows you to quickly and accurately measure the distance between two cornhole boards.
How it works:
- Attach The Regulator to the bottom of one board using the supplied screws (1 inch behind the back of the hole)
- Pull the knob/string through the board hole towards the second board. When the string stops, that is where the front of your second board should go
- Walk the self retracting string back to The Regulator (NOTE: Do not allow the string to snap back to the regulator as it can potentially break and will not be covered by the warranty)
This is the fastest and most convenient way to measure between boards. No more walking off paces or pulling out a measuring tape. The Regulator is already installed under your board and ready to measure the distance any time!
- The string is very strong rated at 150lbs and is the exact length from the installation point to the front of the second board
- The Regulator stays hidden out of the way on the underside of the board during play
- Easy to install using the three included screws into almost all wooden boards. As long as you have 4.25 inches between the back of the hole and the back part of your frame, The Regulator will fit. (Not recommended for plastic boards)
30 Day Warranty: Covers broken/faulty springs, string, and housing. Warranty does not cover a damaged "knob" (the part at the edge of the string)